Adjustable paving support is designed for concrete pavers, porcelain pavers or deck tiles to lay level over a built up roof. Our paver pedestal system is a innovative product, allowing for self leveling, screw adjustable, simple model for all height applications and are stack-able. It has great stablility on structure. The pedestals are suitable for a wide range of surface platforms such as stone, marble and granite tiles, timber decking, water features, temporary platforms and industrial flooring.

Product Details

Composition

1 head(130mm)+ 1 sapcer+1 shim +2 fix collar+1 extender +1 base(75mm)

Spacer (2mm//5mm/6mm/10mm thickness)
The head can be fitted with spacer tabs, to give the desired opening between tiles (for water drainage and ventilation).

Rubber shim(1mm/2mm thickness)
For use with marble, stone slabs, ceramic tile, porcelain tile, granite paving tiles etc.
Add anti-slip performance
Shock and sound absorption
Compensate for stone thickness variation

Fix collar
Fix and lock the screws after adjustment, ensure pedestals are secured at desired heights and are easily removed when not required

Height Range
Adjustable height from 210mmto 320mm uninterrupted.

Performances
Resisting UV rays, weather, sea salt and almost all chemicals
Temperature range: -40? to + 120?

Applications
Support for outdoor terraces with any kind of material:timber decking,
stone, ceramic, composite materials, metai, fiberglass grid.
Can be placed on any stable substrate, aslo over insulation panels.

Slope corrector 0 to 5%
Slope corrector is placed on the top of pedestal.
Consisting of 2 cylindrical parts, it allows to compensate for 0% to 5% slopes by simply rotating the devices.

Maintenance Guide
Routine maintenance of your paver deck system will enhance the beauty, reduce major repairs, and prolong the life of your deck.
Below is a list of maintenance guidelines that should be performed on a regular basis:
1. Check for "rocking" pavers. If you notice pavers rocking back and forth while walking on the deck simply lift paver up and shim 1 or more corners until paver is level on all four corners. To ensure pedestal stability, make sure "indicator bumps" are engaged. XInyuan shims can be ordered and shipped.
2. Depending on substrate materials some settling and or deflection can occur. Remove paver and adjust the pedestal until level height is achieved. You may need to do this on more than one pedestal to level out an area.
3. Clean drains and scuppers on a regular basis. Water should completely drain off roof deck within 48 hours after rainfall, under ambient drying conditions. Standing or "ponding" water can be detrimental to some waterproofing systems.
4. Periodically check spacer tabs between pavers and replace broken spacer tabs immediately. Loss of spacer tabs can cause unsafe deck movement.
5. Make sure the edge restraint remains intact. There should not be room around perimeters of the deck in excess of 1/8" width which could cause lateral movement of pavers, and create an unsafe condition.
6. Follow paver manufacturers' suggestions for upkeep and maintenance of pavers.